TH3318 is formulated with a variety of additives such as superior
detergent, dispersant, antioxidate/ corrosion inhibitor, etc. The
oil prepared from TH3318 possesses the properties of low ash, fine
dispersibility and antioxidation, applicable to natural gas engine
as well as gasoline engine.
Treating rate (m%)
Above treating rates are calculated by addition method. This
package is suitable for preparation of SAE 30, 40, 50, 10W/30,
15W/40 internal combustion engine oils blended with Group Ⅰ and
Group Ⅱ base oil, and the quality complies with API standard.
Density, kg/m3, at 20oC
Flash point (COC),oC
Kinematic viscosity, mm2/s, at 100oC
Total base number, mgKOH/g
Sulfate ash, mass%
Mechanical impurities, mass%
Packing,Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid
contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery
acceptance should meet the requirement of SH/T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by
adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending
should not exceed 110oC.